Foliatec 31941 Frame Defender Paint Protection Film Set for Protection against Stone Chips and Scratches on the Bike 31 Pieces Clear Matt
Frame Defender Paint Protection Film Kit is a quick and easy way to protect your paint from stone chips, scratches, wear and loss of value, helping to maintain the value of your bike. The 31-piece universal kit is made from highly durable polyurethane material and is easy to apply and remove.
- Universal set of 31 pieces ready cut
- Available in crystal or matt
- Extremely robust: the highly resistant polyurethane material is resistant to cold, heat, moisture, ice, salt and UV radiation. Even pressure washers are no problem for the strong protective film.
- Effective as a paint protection film: protects the frame from stone chips, scratches, wear and maintains the value of the bike.
- Easy to install: the self-adhesive film can be easily attached to the corresponding areas without bubbles using a wet application.
- Easy to remove: the paint protection film leaves no residue when peeled off even after years and thus protects the paint.
Tip: We recommend leaving the film on the paint for a maximum of two years. Then it should be replaced.
Use:
- Thoroughly clean the surface on which the film is to be applied. Use silicone remover, isopropanol or alcohol to clean (no spirit or washing petrol). Rub surface dry with a lint free cotton cloth.
- Peel off the backing paper.
- Spray the surface and the adhesive side of the film generously with a mixture of water and a few drops of dishwashing liquid.
- Place the piece of film on the surface and position.
- Spray the surface of the film again, press and stick it with the help of a squeegee or lint-free cotton cloth from the middle to the outside. Remove or absorb the squeaked liquid with a cotton cloth.
- Product Dimensions : 9.84 x 0.39 x 23.23 inches; 2.12 ounces
- Studio : FOLIATEC
